Jump to content


  • Content count

  • Joined

  • Last visited

  • Days Won


Pigeon142 last won the day on March 16 2017

Pigeon142 had the most liked content!

Community Reputation

1 Neutral

About Pigeon142

  • Rank
  1. Bodhi 4 ACPI Events Acer C720

    Thanks, I setup the edge binding and it suspends the machine as does pressing the power button (I have configured it to bring up the menu / ask me what to do).
  2. Bodhi 4 ACPI Events Acer C720

    I gave that a go but nothing changes. The lid closing event is still not captured.
  3. Bodhi 4 ACPI Events Acer C720

    Thanks DOOMguy. I did come across this thread. It alerted me to changing the setting in logind.conf. I removed the # in front of HandleLidSwitch=ignore in logind.conf. As a result when I close the lid of my laptop nothing happens. I looked up the manpage for logind.conf @ http://manpages.ubuntu.com/manpages/trusty/man5/logind.conf.5.htmlwhich stated that another option might be lock. I tried HandleLidSwitch=lock but that had no effect. Now that logind.conf is set to ignore the lid closing (which works) I was hoping that the ACPI bindings setting (referenced above) would now handle the event but it does not. Is there anything else that might be interfering?
  4. Bodhi 4 ACPI Events Acer C720

    Thanks for such a quick response Jeff. The issue is that the computer does not respond to the the ACPI event. There is one binding there currently which is set to suspend but if I close the lid nothing happens. If I try to add another binding I am asked to trigger the ACPI event. Presumably this means to close the lid? When I do this and reopen the lid I am still met with a dialog box asking me to trigger the ACPI event. Nothing actually happens.
  5. Bodhi 4 ACPI Events Acer C720

    Hi, I am not sure if I am asking in the correct section but I am trying to get my laptop to suspend and lock the screen when I close the lid. I have installed Bodhi 4 and the process was very smooth. As default the laptop goes into suspend when the lid is closed but it does not lock the screen. I have tried setting logind.conf to ignore the event. This works in that the laptop does not go into suspend mode when closing the screen. Despite this I am unable to get the lid close event to be recognised in settings/input/ACPI bindings in order to bind it to suspend. If I suspend via clicking the power icon (bottom right) and then suspend the machine suspends and the screen is locked. I would like to replicate this behaviour on closing the lid of the laptop. I have been searching for the answer but have been unable to find it. Any help would be greatly appreciated. Thanks, Pigeon
  6. Just tried this and didn't work. Now I can access the dashccam but not the home network. I started nm-applet in a terminal and get a message identical to this: "** Message: No keyring secrets found for .... /802-11-wireless-security; asking user"
  7. Hi Charles, Thanks for the suggestion I have tried the IPV6 on various settings, including ignore, and it has made no difference. Are there any other logs which might help me track down the issue? Driving me slightly mad as it only happens on certain networks but I am sure I will get a better knowledge of Bodhi though as I try to track down the issue Regards, Steve
  8. Hi, This my first post so please be gentle. I have installed the tweaked Bodhi version for the Acer c720 and it has been great (thanks for the work that has been put into this). Everything is working fine other than flaky wifi. I can connect to my home network with no issues but have setup a connection to Eduraom which is problematic as is the connection to my dashcam. In the first instance the laptop connected to the university network but then started disconnecting. The next time I tried to connect I couldn't for over an hour, it then connected and within minutes disconnected again. The correct password has been entered but now perhaps 1 in 50 attempts to connect work and it just loops asking for me to re enter the password. Any help would be greatly appreciated. (I don't know what logs would be needed but please see below as I try to connect - connecting to dashcam. Same reason code given when disconnecting from Uni wifi on Eduroam) dmesg: [ 2702.049057] ath: phy0: TX while HW is in FULL_SLEEP mode [ 2702.049071] ath: phy0: TX while HW is in FULL_SLEEP mode [ 2702.055818] cfg80211: Calling CRDA to update world regulatory domain [ 2704.028012] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2704.134812] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2711.625113] wlan0: authenticate with 00:14:6c:fd:8e:2e [ 2711.634874] wlan0: send auth to 00:14:6c:fd:8e:2e (try 1/3) [ 2711.636996] wlan0: authenticated [ 2711.637316] ath9k 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 2711.637322] ath9k 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 2711.639545] wlan0: associate with 00:14:6c:fd:8e:2e (try 1/3) [ 2711.642378] wlan0: RX AssocResp from 00:14:6c:fd:8e:2e (capab=0x431 status=0 aid=2) [ 2711.642760] wlan0: associated [ 2711.642772] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2846.122442] wlan0: deauthenticating from 00:14:6c:fd:8e:2e by local choice (reason=3) [ 2846.138254] cfg80211: Calling CRDA to update world regulatory domain [ 2849.051958] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2849.175766] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready